| Compliance
Testing
Compliance testing is performed based on the PCISIG compliance
checklist. A complete suite of master and target tests are performed
automatically. During some tests the user is prompted to change the system
setup or initiate a bus cycle from the device under test.
Compliance Display
The compliance display is divided into 2 windows;
Test Checklist
Test Results
|
Test
Checklist
The compliance test checklist window allows selection of specific
tests. Set All and Clear All buttons are provided to select all the tests
and clear all the tests. Tests are grouped in categories for easy group
selection. The checklist can be saved and later loaded.
Test Result Window
After starting the compliance test the result window displays each
test and if the test passed. The user can scroll through these results as
well as save them to a file. |
Device
Identification
Before starting the compliance test the configuration space is scanned
to determine the device to be tested.
Vendor information is displayed to identify the device. To select
another device Back and Next buttons start a new scan of the configuration
space before and after the current device.
Multiple Test Functions
Many of the features of the PCI850 are used during the compliance
tests. These include tracing, exercising, anomaly detection, target access
and configuration scanning. |
